SL691 VIDEO LIGHT SEALIFE SEA DRAGON 6000F SET INC. DUO SET
GARANSI PABRIK / FACTORY GUARANTEE
( 1 TAHUN / 1 YEAR )
* KETENTUAN GARANSI
Link: https://www.sealife-cameras.com/limited-warranty/
· Two Powerful 3000 lumen LED lights
· 120° wide beam angle
· Depth rated to 330ft / 100m
· Corrosion-proof light heads
The Sea Dragon Duo 6000 underwater lighting set packs a powerful 6000 lumens using two Sea Dragon 3000 COB LED lights mounted on a Flex-Connect® Dual Tray. The ergonomic grips increase camera stability while the dual lights increase beam angles even further.
The Sea Dragon 6000F Duo s a Flex-Connect Dual Tray, two Grips, and two powerful Sea Dragon 3000F Auto COB LED lights.
Powerful 3000 lumens featuring BridgeLux Gen 7 Vero COB LED Array
Auto Bright mode adjusts from 300 to 3000 lumens to preserve your eye’s natural night vision and extends battery life
Auto Flash Detect mode*. Light turns off for 1 second when detecting external flash. Flash detect can be turned on or off. Flash detect works in all 5 light modes
One button control for easy operation. One button to power light on/off and brightness
Five Light modes: 3 white modes (Manually adjust to 100%, 50% or 25%), 1 white Auto (Automatically adjusts from 10% to 100%) and 1 Red light mode
60 minute burn time at full power
Constant brightness - Regulated circuitry so light won’t dim with battery power.
80 Color Rendering Index (CRI) that mimics natural daylight.
Easy to expand with Flex-Connect™ trays, grip and flex arms
Quick-release button to detach light and aim in crevices and hard to reach areas
120° wide beam angle evenly illuminates the subject with no hot spots. 90° underwater
Emergency mode emits blinking light or SOS signal to alert others of distress. Activated by holding down power button for 5 seconds from power off state
Depth rated to 330 ft (100m)
Corrosion-proof metal light head for heat dispersion and durability
Removable 25Wh 3400 mAh Li-Ion battery w/ charger and international plug adapters d
Waterproof battery compartment protects internal electronics even if light accidently floods
Mounting tray with universal ¼-20 screw fits all SeaLife and other brands
Sea Dragon 3000F Auto Photo/Video Light Specifications
Body Material
|
Anodized aluminum light head with fiber-reinforced polycarbonate body
|
Light Source/Bulb Type
|
1x COB LED Array (BridgeLux Gen 7 Vero LED Array - BXRE-50E4001-C-74)
2x Cree XP-E red LED’s
|
Brightness
|
White light: 3000 lumens (maintained throughout run time at full power)
Red light: 180 lumens
|
Brightness Control/Light Modes
|
100% white → 50% white → 25% white → Auto white → Red → repeat cycle
|
Color Temperature
|
5000K
|
Color Rendering Index
|
80
|
Beam Angle
|
White Light: 120° on land / 90° underwater
Red light: 88° on land / 66° underwater
|
Battery
|
Lithium Ion 7.4V, 3400 mAh, 25Wh (d)
|
Battery Charge Time
|
170 minutes
|
Run Time
|
60 minutes at full power, 120 min at half power or Auto, 240 min at quarter power
|
Depth
|
Tested to 330 feet/100 meters
|
Dimensions
|
8.5" x 9.5" x 2.3" (22cm x 24cm x 6cm), fully assembled with light head, battery, grip and tray
5.1" x 2.2" x 4.1" (13cm x 5.6cm x 10.4cm), head only
|
Weight
|
14.4 ounces (408 grams) light head w/battery installed
|
Bulb Life
|
35,000 hours
|
O-ring
|
Dual silicone O-rings (lube d)
|
Buoyancy
|
Negative
|
*CRI is a measure of a light source's ability to show object colors "realistically" or "naturally" compared to daylight, which has a CRI of 100 and represents the maximum value.
The beam angles for the Sea Dragon lights are shown as the true, tested “in-air” (above water) beam angle. Underwater, due to light refraction, the angle tightens to approximately 33% less.
Avoid using this Sea Dragon light above water for prolonged periods of time
The light is designed for underwater use and water is needed to displace heat. The metal light head at full power will reach temperature of about 140F (60C) degrees within a few minutes, which may cause burning if touched. A thermal sensor will automatically dim the light if internal temperatures reaches 150F (65C) degrees. Immediately turn off light if any parts of the light become hot to the touch.