BCD Set Scubagear Zeepro V2 Profesional Double

BCD SET ZEEPRO SCUBAGEAR V2 PROFESIONAL REGULATOR OCTOPUS CONSOLE PRESSURE GAUGE DOUBLE 2 IN 1 SCUBA DIVING DIVE

BCD SCUBAGEAR BASIC JACKET V2

WARRANTY POLICY
1 Year warranty is for bladder air seams, valve, low pressure hose, airway, power inflator and tank band buckle, the warranty is based on normal use and care, but it doesn't cover the damage resulting from accident, misuse, material abrasion, punctures, cuts, or de-lamination due to chlorine exposure.

All the BC's should be under normal care as below:
- Rinse the outside of BCD thoroughly with fresh water.
- Fill the BCD one third full with fresh water through the inflator mouthpiece.
- Fully inflate the BCD, rotate and shake the BCD to rinse the interior thoroughly.
- Drain the water out through mouthpiece.
- Fully inflate the BCD and allow it dry inside and outside.
- Store partially inflated out of direct sunlight in a cool, dry place.
- Periodically add BC disinfectant (available in dive stores) to rinse water to kill any bacterial growth.

1ST STAGE ZEEPRO DIAPHRAGM SEALED SWIVEL TURET (DIN)
Balanced design provides consistent gas flow
Swivel turret achieves optimal hose routing
Environmentally sealed to protect against internal corrosion
Five LP ports (3/8-24 UN)
Two HP ports each angled 90 degrees from fitting (7/16-20 UNF/ISO263)
Intermediate pressure : 140 PSI
Chromium plated brass body
Stainless steel springs
Weight : 810 grams

2ND STAGE ZEEPRO XTX ADJ
The Zeepro 2nd stage is a balanced adjustable second stage in a rugged low-weight body featuring metal internal components with increased resistance to freezing when diving in extreme conditions. The large diaphragm and exhaust valve provide responsive inhalation and easy exhalation in all positions. An adjustable inhalation effort knob sets the cracking resistance to your preference and the dive/pre-dive switch minimizes free flow in when used as a backup.

CONSOLE GAUGE ZEEPRO 52MM 2 IN 1 BIG PRESS DEPTH W/ SIDE SLOT + HP HOSE GAUGE RUBBER/BRAIDED BLACK

Pressure gauge console 2 in 1 from zeepro (Made In Italy)
0 – 400 bar and 60 meters is max depth.
High visibility luminous display for easy reading, 52mm diameter and 22mm thickness, temperd glass lens
Comes with 80 cm high pressure hose
The only depth module that can adjust the neddle level
Available 2 holes on both left and right side console boot to make easier diver to attach with BC
Compatible with additional compact compass for diver
Recommended for dive center purpose used
Manufactured in Italy

SPECIALIST : Alat Selam - Alat Snorkeling - Kursus Dive Course - Service Alat Selam - Terra Tabung - Perahu Karet - Banana Boat - Rafting Boat - Mesin Kapal