BCD Set Scubagear Zeepro V2 Ultimate Double

BCD SET ZEEPRO SCUBAGEAR V2 ULTIMATE REGULATOR OCTOPUS CONSOLE PRESSURE GAUGE DOUBLE 2 IN 1 SCUBA DIVING DIVE

BCD SCUBAGEAR BASIC JACKET V2

WARRANTY POLICY
1 Year warranty is for bladder air seams, valve, low pressure hose, airway, power inflator and tank band buckle, the warranty is based on normal use and care, but it doesn't cover the damage resulting from accident, misuse, material abrasion, punctures, cuts, or de-lamination due to chlorine exposure.

All the BC's should be under normal care as below:
- Rinse the outside of BCD thoroughly with fresh water.
- Fill the BCD one third full with fresh water through the inflator mouthpiece.
- Fully inflate the BCD, rotate and shake the BCD to rinse the interior thoroughly.
- Drain the water out through mouthpiece.
- Fully inflate the BCD and allow it dry inside and outside.
- Store partially inflated out of direct sunlight in a cool, dry place.
- Periodically add BC disinfectant (available in dive stores) to rinse water to kill any bacterial growth.

1ST STAGE ZEEPRO USA TECH EXTRA PISTON BALANCED SWIVEL TURET (DIN)

The Zeepro EXTRA 1st stage is a extreme-performance design based on a balanced flow-through piston in a PFD chrome-plated brass body that provides consistent gas flow regardless of cold-water, depth, and tank pressure. Two standard high pressure 7/16-inch ports and five standard high-flow low pressure 3/8-inch ports on a swivel turret provide an infinite variety of mounting orientations and hose routing options. This 1st stage also s an auto-closure on the first stage that shuts the DIN inlet when not engaged on the valve, potentially avoiding the accidental flooding of the first stage. This first stage comes standard with a 300-BAR DIN connector and is Nitrox Ready.

2ND STAGE ZEEPRO EXTRA ADJ MATTE PEARL
Features :
Balanced High-performance Second Stage
Metal Air Barrel and Metal Valve Inlet Tube
High-flow Exhaust Valve
Diver-Adjustable Inhalation Effort Knob
Dive/Pre-Dive Switch
Color : Black, Yellow

CONSOLE GAUGE ZEEPRO 52MM 2 IN 1 BIG PRESS DEPTH W/ SIDE SLOT + HP HOSE GAUGE RUBBER/BRAIDED BLACK

Pressure gauge console 2 in 1 from zeepro (Made In Italy)
0 – 400 bar and 60 meters is max depth.
High visibility luminous display for easy reading, 52mm diameter and 22mm thickness, temperd glass lens
Comes with 80 cm high pressure hose
The only depth module that can adjust the neddle level
Available 2 holes on both left and right side console boot to make easier diver to attach with BC
Compatible with additional compact compass for diver
Recommended for dive center purpose used
Manufactured in Italy

SPECIALIST : Alat Selam - Alat Snorkeling - Kursus Dive Course - Service Alat Selam - Terra Tabung - Perahu Karet - Banana Boat - Rafting Boat - Mesin Kapal